Alignment Tools

wallzip
Permalink Gallery

Wallzip

Wallzip

The Wallzip tool combines a Wallstick with a DB Wallbanger to fit the following Waterwall tube sizes:

Product #
O D Tube Size
Centers

Wallzip™-7/8×1-1/2
7/8”
1-1/2 Inch

Wallzip™-1×1-1/2
1”
1-1/2 Inch

Wallzip™-1-1/8×1-5/8
1-1/8”
1-5/8 Inch

Wallzip™-1-1/4×1-3/4
1-1/4”
1-3/4 Inch

Wallzip™-1-3/8×2
1-3/8”
2 Inch

Wallzip™-1-1/2×2
1-1/2”
2 Inch

Wallzip™-1-1/2×2-1/8
1-1/2”
2-1/8 Inch

Wallzip™-1-1/2×2-1/4
1-1/2”
2-1/4 Inch

Wallzip™-1-3/4×2-1/4
1-3/4”
2-1/4 Inch

 

Gripper
Permalink Gallery

Gripper

Gripper

Fastens quickly to tube for hoisting; eliminating the need to use ropes, half hitches and rope chokers.
Boiler tube application: Generating tubes

Boomer

Quickly and accurately aligns tubes for fit-up with the chill-ring and
consumable inserts. Also available with a turnbuckle combination for
more control over pushing and pulling of tubes into alignment.

Boiler tube applications: Superheat, Reheat, Economizer, Crossover and Penthouse.

• Increase productivity by 50% to 300%
• Improve quality control
• Enhance safety

Boilermaker
Permalink Gallery

Boilermaker Kit

Boilermaker Kit

Quickly and accurately aligns tubes for fit-up. The Boilermaker Kit is a combination of the Boomer and Wallbanger-HD tools

Boiler tube application: Superheat, Reheat, Economizer, Crossover & Penthouse tubes

Patent pending safety feature allows for quick and easy tie-off of tools using
readily available tie wire; prevent injury, prevent tool loss.

• Increase productivity by 50% to 300%
• Improve quality control
• Enhance safety

Wallsticks
Permalink Gallery

Wallsticks

Wallsticks

Four sets of Wallsticks, air impact wrench, socket & bolts.
With Safety Pins, quickly and accurately aligns waterwall tubes with 1/4” or 3/8” membrane.

Boiler tube application: Waterwall

Wallsticks™ can be used with a single set or in combination with 2 or more sets. One “set”
includes: 1 – clearance half and 1 – threaded half with bolt and an
impact wrench. Each Wallsticks come with your choice of 3/8” or 7/16”
grade 8 bolt. Only tighten bolts evenly and as needed to bring the
waterwall panel into alignment.
Wallsticks™ may also be used alongside the Walhonde Wallbangers™
Made of high strength heat treated stainless steel.
Patent pending safety feature allows for quick and easy tie-off of tools using
readily available tie wire; prevent injury, prevent tool loss

• Increase productivity by 50% to 300%
• Improve quality control
• Enhance safety

WallbangerHD
Permalink Gallery

Wallbanger-HD

Wallbanger-HD

Quickly and accurately fits one tube at a time

Boiler tube application: Waterwall, Superheat, Reheat, Economizer, Crossover, Header, and Generating tubes

Each order of a Wallbanger includes an air impact wrench, socket & bolts.
Patent pending safety feature allows for quick and easy tie-off of tools using
readily available tie wire; prevent injury, prevent tool loss

• Increase productivity by 50% to 300%
• Improve quality control
• Enhance safety

WallbangerDBHighRes
Permalink Gallery

Wallbanger Tools-DB

Wallbanger Tools-DB

Two Wallbangers-DB, two air impacts, sockets & bolts.
Quickly and accurately fits two waterwall tubes at a time.
Boiler tube application: Waterwall

Each order of a Wallbanger includes an air impact wrench, socket & bolts.
Patent pending safety feature allows for quick and easy tie-off of tools using
readily available tie wire;prevent injury, prevent tool loss.

• Increase productivity by 50% to 300%
• Improve quality control
• Enhance safety

Top-Liner
Permalink Gallery

Top Liner

Top Liner

Quickly and accurately aligns heavy-wall & thin-wall pipe.
Reduces repair from having to weld bridges and dogs.
Available as a Pipe-to-Pipe unit or Pipe-to-Elbow unit.
On sizes 24” & above, the clamp will fit both Pipe-to-Pipe & Pipe-to-Elbow.
Available in Carbon Steel or Stainless Steel.

KEY ADVANTAGES

High-low adjustment
Gap spacing adjustment
Rounds out pipe on sch. 40 & below
Works on heavy-wall pipe
Increase Productivity
Improve Quality Control
Enhance Safety

Top-Dawgs
Permalink Gallery

Top Dawgs

Top Dawgs

The Top Dawgs are alignment “dawgs” with weldable lugs made of carbon
steel or stainless. The turnbuckles allow for push-pull capabilities and
the jackscrews control high-low.
Used to align pipe, plate, tank vessels and steel structures.